Audio-Technica PRO-302 Pro Series 3 VHF Wireless Handheld Microphone System

No longer available at zZounds
Control the stage with the Audio-Technica PRO-302 Pro Wireless Handheld Microphone -- a super-affordable wireless mic for live performance.

The Audio-Technica PRO-302 Pro Series 3 VHF wireless handheld microphone system includes a PRO-R300 receiver and PRO-T302 handheld microphone/transmitter. Also included is a AT8456a Quiet-Flex stand clamp and a system storage case. Audio-Technica Pro Series 3 systems provide rock-solid performance, easy operation and clear sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, the Pro Series 3 Wireless Systems are single-channel, fixed-frequency systems available in three VHF travelling frequencies (169.505, 170.245, and 171.905 MHz) that operate outside the range of US broadcast television. All three fixed-frequency systems work together with no interference from TV channels, and no frequency coordination is required.

This Pro Series 3 Wireless System includes a PRO-R300 receiver and a handheld microphone/ transmitter. The PRO-R300 is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The PRO-R300 also offers volume control along with AF Peak, RF and Power indicator lights. All components fit conveniently in an included rugged case, ideal for storage and use on the road.

Features:

- Easy operation and clear sound quality
- Reliable performance and durable construction
- Available in a choice of three fixed VHF frequencies that operate outside the range of US broadcast television
- read more Includes rugged storage/road case designed to fit all components
- Advanced dipole antenna system for extended operating range
- Power, RF, and AF Peak indicators
- Volume control, 1/4" output jack and space-saving power supply
- Rugged unidirectional dynamic element
- Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
- Available in 7 system configurations

Consumer Alert
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.
read less

System Specifications:
- Operating Frequency: VHF high band, 169 MHz to 172 MHz
- Number of Channels: Fixed channel
- Frequency Stability: +/-0.005%
- Modulation Mode: FM
- Maximum Deviation: +/-15 kHz
- Operating Range: 200' typical
- Operating Temperature Range: 40* F (4* C) to 110* F (43* C)
- Frequency Response: 80 Hz to 13 kHz

Receiver Specifications:
- Receiving System: Non-diversity, single-channel, dual antenna system
- Image Rejection: 50 dB minimum
- Signal-to-noise Ratio: 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz
- Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz)
- Sensitivity: 20 dBuV for 60 dB S/N (IEC-weighted)
- Audio Output: 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)
- Output Connector: 1/4" TS ("mono") phone jack
- Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
- Dimensions: 7.48" (190.0 mm) W x 1.65" (42.0 mm) H x 5.12" (130.0 mm) D
- Net Weight: 11.0 oz (311 g)
- Accessory Included: Power supply

Body-Pack Transmitter Specifications:
- RF Power Output: 10 mW High position, 2 mW Low position, typical
- Spurious Emissions: Under federal regulations
- Dynamic Range: >=90 dB, A-weighted
- Input Connections: High impedance, low impedance, bias
- Battery: 9V (NEDA type 1604) alkaline, not included
- Current Consumption: 30 mA typical
- Battery Life: Approximately 15 hours in High position;
- Approximately 20 hours in Low position
- (depending on battery type and use pattern)
- Dimensions: 2.56" (65.0 mm) W x 4.33" (110.0 mm) H x 1.00" (25.4 mm) D
- Net Weight: 2.8 oz (78 g) (without battery)

Handheld Transmitter Specifications:
- RF Power Output: 10 mW High position, 2 mW Low position, typical
- Spurious Emissions: Under federal regulations
- Dynamic Range: >=90 dB, A-weighted
- Microphone Element: Dynamic unidirectional
- Battery: 9V (NEDA type 1604) alkaline, not included
- Current Consumption: 30 mA typical
- Battery Life: Approximately 15 hours in High position;
- Approximately 20 hours in Low position
- (depending on battery type and use pattern)
- Dimensions: 9.50" (241.3 mm) long,
- 2.10" (53.3 mm) maximum diameter
- Net Weight: 12.7 oz (360 g) (without battery)
- Accessory Included: AT8456a Quiet-Flex(TM) stand clamp

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com