Audio-Technica AT899cW Omnidirectional Lavalier Microphone for Audio-Technica Wireless Systems

No longer available at zZounds

Audio-Technica AT899cW Omnidirectional Lavalier Microphone for Audio-Technica Wireless Systems, Black

Audiences may not see the low-profile AT899cW lavalier mic on a performer, but they will surely hear its clear and accurate vocal reproduction.

Overview

Audio-Technica's omnidirectional AT899 is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5 mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. It offers the convenience of battery or phantom power; its switchable low-frequency roll-off reduces popping. This microphone is meant to be used with Audio-Technica wireless systems.

Features:

- Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
- Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
- Operates on battery or phantom power
- RoHS compliant -- free from all substances specified in the EU directive on hazardous substances
- 9.8 foot cable permanently attached to mic, TA3F connector (4-pin) at power module
- Includes a clothing clip, viper clip, magnet clip and windscreens, element covers and interchangeable single and double mic holders

Specs

Element: Fixed-Charge Back Plate, Permanently Polarized Condenser

Polar Pattern: Omnidirectional

Frequency Response: 20-20,000 Hz

Low Frequency Roll-Off: 80 Hz, 12 Db/Octave

Open Circuit Sensitivity: Phantom: -43 Db (7.0 Mv) Re 1v At 1 Pa

Impedance: Phantom: 200 Ohms

Maximum Input Sound Level: Phantom: 138 Db Spl, 1 Khz At 1% T.H.D.

Battery: 116 Db Spl, 1 Khz At 1% T.H.D.

Dynamic Range (Typical): Phantom: 108 Db, 1 Khz At Max Spl

Battery: 86 Db, 1 Khz At Max Spl

Signal-To-Noise Ratio: 64 Db, 1 Khz At 1 Pa

Phantom Power Requirements: 11-52v Dc, 2 Ma Typical

Battery Type: 1.5v Aa/Um3

Battery Current / Life: 0.4 Ma / 1200 Hours Typical (Alkaline)

Switch: Flat, Roll-Off (Recessed)

Weight (Microphone): 0.02 Oz (0.5 G)

Dimensions (Microphone): 0.63" (16.0 Mm) Long,
0.20" (5.0 Mm) Diameter

Output Connector (Power Module): 9.8 foot cable permanently attached to mic, TA3F 4-pin connector at power module

Cable: 9.8' (3.0 M) Long (Permanently Attached To Microphone), 0.08" (2.0 Mm) Diameter, 2-Conductor, Shielded Cable With Ta3f Output Connector That Mates With Tb3m Jack On Power Module