Audio-Technica AT4041SP Studio Pack

Outfit your studio with a pair of the best mics available from Audio-Technica. Includes 2 mics, 2 stand clamps, 2 windscreens and a wooden case.

The AT4041SP Studio Pack offers two AT4041 studio condenser microphones. Engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound, the AT4041 features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.

Includes:

- Two AT4041 cardioid condenser microphones
- Two AT8405a stand clamps
- Two AT8159 windscreens
- Protective wooden storage case.

Features:

- Smooth, extended frequency response with a slight rise occurring in the high-frequency region
- Ideal for drum overheads, acoustic guitar, piano, horns and under snare
- Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
- Switchable hi-pass filter and rugged turned-brass microphone housing

- Element: Capacitor
- Dynamic Range (Typical): 121 dB, 1 kHz at Max. SPL
- Polar Pattern: Cardioid
- Phantom Power Requirements: 48V (+/-4V)
- Frequency Response: 20 - 20,000 Hz
- Switch: Flat/roll-off
- Open Circuit Sensitivity: -36 dB (15.8 mV), +/-2 dB re 1V at 1 Pa
- Low-frequency Roll-off: 80 Hz, 12 dB per octave
- Impedance: 100 ohms
- Weight: 4.2 oz. (120 g)
- Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
- Output Connector: XLRM-type
- Signal To Noise Ratio: 70 dB, 1 kHz at 1 Pa
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 3.5 lbs
Shipping Dimensions: 12 x 10 x 4 in
Manufacturer Part Number (MPN): AT4041SP

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

Reviewers gave this product an overall rating of 5 out of 5 stars. (2 ratings)
Submitted April 5, 2011 by a customer from embarqmail.com

"The True Acoustic Sound"

Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
There is no doubt I will supplement my 4041's with something else by AT ...
Sound
I have used the AT 3031's in the past, even for vocals... but the 4041's are the ideal solution for acoustic music... you want your acoustic guitar or mandolin to sound clean, clear and keep the purity of the instrument... the 4041 gives you that and more
Features
The only thing it came with was the stand adapter and wind screen...
Ease of Use
Plug and Play... it just doesn't get any easier...
Quality
as to the quality? If sound is any indication of the quality, it can't be beat. I've used Audio Technica for several years and it's the best bang for the buck out there anywhere
Value
The AT 4041 mic is beyond a doubt the best value for the dollar spend ...
Manufacturer Support
I've never had to use support on any of my AT products...
The Wow Factor
It was a practical addition to my current configuration.

Musical Background:

bluegrass musician

Musical Style:

bluegrass
6 of 6 people (100%) people found this review helpful. Did you?
Thanks for your opinion!

New

$549.00
  • 8 x  
    $68.63
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to