AKG Drumset Premium Microphone Package

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
open zoom image for AKG Drumset Premium Microphone Package, Main
AKG Drumset Premium Microphone Package, Main
zZounds Gear Experts Say...
Reinforce or record your entire drum kit with AKG's studio-quality mics, from the classic C451 B condenser on hi-hat to the unique D12 VR on kick drum.

Ensure your drumming comes through loud and clear on stage -- and your mics come home safe and sound -- with the AKG Drum Set Premium Microphone Package. Stocked with AKG's studio-grade microphones, including the legendary C451 B pencil condenser and a pair of the workhorse C214 large-diaphragm condensers, this kit is a worthy addition to any studio's microphone locker.

Package Contents:

- One D12 VR large-diaphragm cardioid dynamic microphone
- Two C214 large-diaphragm condenser microphones
- One C451 B small-diaphragm condenser microphone
- Four D40 dynamic microphones
- Four K&M 24030 microphone holders
- Protective aluminum carrying case

D12 VR Reference Kick Drum and Bass Microphone

Specifically designed for kick drum, AKG's D12 VR cardioid dynamic microphone with original C414 transformer has an ultra-thin diaphragm that enhances low-frequency performance. Without phantom power, the microphone delivers the pure character of the sound source. And with phantom power enabled, one of three switchable active-filter presets can be used to quickly adapt the microphone response to suit your desired kick drum sound. In fact, the D12 VR's versatile tone-shaping abilities earned it a 2012 Best of Show rating from ProSound Network.

Two C214 Large-Diaphragm Condenser Microphones

Designed as a cost-effective alternative to the industry-leading C414 microphones, AKG's C214 microphone uses the same 1" dual capsule as the legendary C414, but in a… read more single-diaphragm, cardioid-only design. The C214's edge-terminated capsule delivers a highly detailed, up-front sound that brings out every nuance of practically any voice or instrument. And with its switchable -20 dB attenuation pad and low cut filter, the microphone can be used on stage for close-up miking for even very loud applications like drum overheads. The C 214's roadworthy construction includes a modern scratch-resistant finish, a dent-resistant, double mesh, all metal grille, and a gold-plated XLR-type output. " ... delivers a highly detailed, up-front sound ... very accurate and solid bottom end, incredible dynamic range ... an excellent choice." --FutureMusic (10 out of 10 rating)

C451 B Condenser Microphone

The AKG C451 B microphone is the current model in a series that dates back to 1969. Responding to growing demand, AKG made the C451 B with the same acoustic performance as the original C451 EB + CK 1, but with dramatically improved specs. Using an extremely light diaphragm, the C451 B is almost totally insensitive to handling noise. Its all-metal body provides excellent protection from RF interference and high reliability for excellent results under almost all conditions. The C451 B is excellent for accurately capturing signals rich in transients such as drums.

Four D40 Dynamic Instrument Microphones

Designed for drums and percussion, the AKG D40 microphone's rugged, all-metal body is also built to withstand the rigors of the road. The D40's patented Varimotion diaphragm's deep-drawing process allows the diaphragm itself to be fine-tuned with no need for tuning resonators, leading to a quantum leap in audio performance.

Four K&M 24030 Microphone Holders

Easily mount microphones directly to your drums with this set of four K&M 24030 microphone holders. These unique mic mounts keep your microphones in place with 3/8" threads, while rubber inserts to absorb shock and noise. The attached thumbscrew means there are no parts to lose. read less

D12 VR Microphone
- Type: Dynamic pressure gradient transducer
- Polar Pattern: Cardioid
- Frequency Range: 17 - 17000 Hz (+/-2 dB)
- Sensitivity: 1,2 mV/Pa +/- -58 dBV (at 1000 Hz passive)
- Max. SPL: 164 dB SPL (for 0,5 % THD)
- Impedance: <200 ohms (at 1000 Hz)
- Recommended Load Impedance: >1000 ohms
- Environment: Temperature Range: -10 degrees C - +70 degrees C, relative humidity at +20 degrees C: 90 %
- Connector: Three-pin male standard XLR
- Finish: Front grille: glossy galvanized nickel matte; Rear grille: matte black paint
- Dimensions: 125 mm x 101 mm x 66 mm (4.9 x 3.9 x 2.6 in.)
- Net Weight: 500 g (1.1 lbs)

C214 Microphone
- Capsule: One inch large diaphragm condenser
- Sensitivity: 20 mV/Pa (-34 dBV)
- Frequency Range: 20 to 20,000 Hz
- Equivalent Noise Level: 13 dB-A (IEC 60268-4)
- Polar Pattern: Cardioid
- Max. SPL: 136 / 156 dB SPL (0 / 20 dB Pad)
- Dynamic Range: 123 / 143 dB-A (0 / 20 dB Pad)
- Low Cut Filter: 160 Hz, 6 dB/Octave, switchable
- Attenuation Pad: 20 dB, switchable
- Phantom Power: 12 to 52 V (IEC 61938)
- Patents: AT 395.225, DE 4.103.784, JP 2.815.488
- Dimensions: 160 x 55 mm (6.3 x 2.2 in.)
- Net / Shipping Weight: 280 / 1450 g (0.62 / 3.22 lbs)

C451 Microphone
- Polar Pattern: Cardioid
- Frequency Range: 20 to 20,000 Hz
- Sensitivity: 9 mV/Pa (-41 dBV)
- Max. SPL: 135/145/155 dB (0/-10/-20 dB) (k=0,5%)
- Equivalent Noise Level (IEC 60268-4): 29 dB
- Equivalent Noise Level (IEC 60268-4, A-weighted): 18 dB-A
- Signal/Noise Ratio (A-weighted): 76 dB
- Preattenuation Pad: 0 dB, 10 dB, 20 dB selectable
- Bass Filter: Flat, 12 dB/octave at 75 or 150 Hz, selectable
- Impedance: <200 ohms
- Recommended Load Impedance: >1000 ohms
- Supply Voltage: 9 to 52 V phantom power to DIN 45596
- Powering: <2 mA
- Connector: 3-pin XLR
- Finish: Satin nickel plated
- Net Weight: 125 g / 4.4 oz.
- Shipping Weight: 760 g / 1.7 lbs.
- Patent(s): Electrode support for condenser transducer (Patent no. AT 392.182, DE 4.021.661)

D40 Microphone
- Type: Cardioid
- Polar Pattern: 75 to 20,000 Hz
- Sensitivity: 4 mV/Pa (-48 dBV)
- Max. SPL: 144/156 dB SPL (for 1%/3 % THD)
- Equivalent Noise Level (IEC 60268-4, A-weighted): 18 dB-A
- Impedance: <=200 ohms
- Recommended Load Impedance: >=1000 ohms
- Connector: 3-pin XLR
- Finish: Dark stage blue
- Dimensions: length 104 mm (4.1 in.) height (incl. stand adapter): 79 mm (3.1 in.) max. dia.: 44 mm (1.7 in.)
- Net Weight: 245 g (8.6 oz.)
- Shipping Weight: 380 g (13.4 oz.)
- Patent(s): Varimotion -- multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651)

K&M 24030 Microphone Holder
- Thread: 3/8"

For support or warranty questions, please contact the manufacturer:
Phone: 818-920-3212
Data Sheet

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer