ADJ Dotz Par Stage Light

No longer available at zZounds
Wash your stage with 60 degrees of high-output LED PAR light. Selectable dim curves and color presets let you dial in the perfect light for your setting.

The American DJ Dotz Par uses advanced COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no RGB shadows. Designed for mobile or permanent wash lighting of stages, clubs, dance floors and churches. The COB LED engine on the Dotz Par is a TRI 36W (3-In-1).

The Dotz Par produces wash of 60-degrees (25-degrees if you put on the supplied lens kit). It has 4 DMX Channel modes for programming flexibility, 35 built-in color macros and 5 selectable Dim Curves. The fixture has many pro features such as: 0-100% electronic dimming, strobe/pulse effect, Flicker Free operation, DMX and power daisy-chaining, and a 4-button LCD DMX display. Dotz Par may run in its stand-alone mode from built-in programs, sound actively, from a DMX controller, or from the ADJ Par RF wireless remote control.

Features:

- High output slim low profile Par fixture with one TRI (3-IN-1) RGB COB LED
- COB Technology (Chip On Board) produces powerful, smooth RGB color mixing with rich palettes of color
- Use as Wash/par or Pixel Mapped for a stunning visual effect
- Intelligently designed, patent pending power & DMX Ins/Outs sit sideways so the unit can be set flat on the ground or set inside truss
- Built-In preset colors and programs
- Flicker Free operation (No flickering on camera)
- 35 built-in Color Macros
- LED pulse and strobe effect
- 5 selectable Dim Curves (Standard, Stage, TV, read more Architectural & Theatre)
- 3-pin XLR chassis mount connectors for DMX linking
- IEC AC IN/OUT to daisy chain power (up to 13 Dotz Par's @ 110V and 28 Dotz Par's @ 230V)
- 4-button LCD DMX display on rear panel
- Single yoke allows fixture to be mounted
read less

- 5x Operational modes: Auto Run, Sound Active, Color Macro, Dimmer, and DMX Controlled Mode
- 4 DMX channel modes: 3, 4, 5 or 9 channel
- Electronic Dimming: 0 - 100%
- Beam angle: 60-degrees (25-degrees with supplied lens kit)
- Power Draw: 36W total (All LEDs @ Full On)
- Light Source: 1x 36-Watt COB TRI LED (RGB: 3-IN-1, rated at approximately 50,000 hrs)
- Auto sensing power supply: AC 100V/60Hz - 240V/50Hz
- Dimensions (L x W x H): 13.5 x 5.75 x 5.75" (340 x 140 x 140mm)
- Weight: 5 lbs (2 kgs)

For support or warranty questions, please contact the manufacturer:
Phone: 323-582-2650
Email: support@adj.com
Web: https://www.adj.com/support

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer