- New from $79.95
- List: $128.45
- Blowouts save up to $50!
- In stock
- 2 people rate: 10 out of 10
Fully enclosed construction is of 16-gauge steel with a black semi-gloss finish. New 12 in. cabinet grade slides allow for full extension. Perfect for anything from pencils, papers and strings to cassettes, cds and tools. Learn More...
- New from $3.95
- List: $29.95
- In stock
- 5 people rate: 9 out of 10
10/32 x .75 in. black oxide, phillips truss head screws with #10 nylon washers to prevent scratching equipment. Learn More...
- More expected 7/9/2009
- 3 people rate: 7 out of 10
These easy-to-install shelves fit all components up to 17-3/8 in. wide to quickly meet all of your rackmounting needs. The shelf is made from 16-gauge steel, and each unit is individually boxed. Learn More...
- New $119.95
- List: $208.90
- In stock
- 1 person rates: 9 out of 10
This 5-1/4 in. (3 rack space) heavy-duty drawer has a faceplate with a black anodized finish. Fully enclosed with inside dimensions measuring 15-7/8 in. wide by 14-1/2 in. deep, the D and TD Series drawers feature spring-loaded latches and rugged, straightforward construction. Learn More...
- In stock
- 3 people rate: 7 out of 10
A 50 lb. capacity and heavy-duty 16-gage steel construction are 2 of the defining features that make the model SS sliding shelf both functional and rugged. Capable of latching in an open or closed position, the shelf slides on ball bearings to an extended length of 14 in. A telescopic rear support mounts the shelf to any rack. Occupies slightly more than a single rack space. Learn More...
- New $104.95
- List: $179.99
- More expected 6/22/2009
- 3 people rate: 7 out of 10
SKB's Heavy Duty Caster Kit fits all standard SKB racks and attaches easily with nylon straps. Does NOT work with GigRig series. Learn More...
- In stock
With the highest percentage of open area found on any of Middle Atlantic's vent panels (68%), all VT Series products are made from 16-gauge perforated steel, and are flanged for extra strength. Black powder coat finish. Learn More...
- New from $5.49
- List: $13.40
Sturdy 14-gauge cold rolled steel; perfect for use where economy is the key. Learn More...
- New $169.95
- List: $284.99
- In stock
- 2 people rate: 4 out of 10
SKB's Heavy Duty Caster Kit fits all standard SKB racks and attaches easily with nylon straps. Learn More...
- New $149.95
- List: $266.16
- Only 2 left!
Fully enclosed with inside dimensions measuring 15-7/8 in. wide by 14-1/2 in. deep, the D and TD Series drawers feature spring-loaded latches and rugged, straightforward construction. Faceplates come with a textured black powder coat or brushed and black anodized finish. Learn More...
- In stock
- 6 people rate: 10 out of 10
This is Raxxess's one space, 14-gauge steel rack shelf. Learn More...
- In stock
- 4 people rate: 8 out of 10
Humfree rack tabs isolate each rack unit from the others, and from the rack itself. Eight tabs per bag. Learn More...
- More expected 6/22/2009
- 4 people rate: 6 out of 10
This RaXXess economy sliding rack is ideal for supporting equipment up to 35 lbs. Ears attached to the rear frame allow the unit to be secured to the back of any enclosed rack. Learn More...
- New $129.95
- List: $186.02
- Blowouts save up to $11!
- In stock
- 1 person rates: 10 out of 10
This 3-1/2 in. (2 rack space) heavy-duty drawer has a faceplate with a black anodized finish. Fully enclosed with inside dimensions measuring 15-7/8 in. wide by 14-1/2 in. deep, the D and TD Series drawers feature spring-loaded latches and rugged, straightforward construction. Learn More...
- New $119.95
- List: $199.99
- In stock
- 5 people rate: 9 out of 10
This 4-space rack drawer fits in all racks, and is Rotomolded to be lightweight, but durable and strong. The double-action ball bearings support the heaviest load you can give it while at the same time easily sliding in and out. Learn More...
This 16-gauge steel shelf, finished in black powder coat will handle up to 60 pounds of equipment. It occupies 3 rack spaces and is 18 inches (UTVS-3-18) deep. Slotted bottom allows for ventilation and slotted rear return for cable management. Learn More...
- In stock
- 1 person rates: 10 out of 10
Middle Atlantic's blank panels are flanged for strength and each model is made from 16-gauge steel. A textured black powder coat finish is used throughout Middle Atlantic's SB Series. Learn More...
- Only 2 left!
- 1 person rates: 10 out of 10
Our fan panels fit all 4-1/2 in. fans. 3 rack spaces (5-1/4 in.) high, they are made from 16-gauge flanged aluminum. Offered in a textured black powder coat, or brushed and black anodized finish. Learn More...
- Only 3 left!
- 4 people rate: 5 out of 10
Store DATs, CDs, DVDs, VHS tapes, cassettes, laser discs, and other recorded media in these rackmount media holders. Partitioned to prevent the contents from tipping, each model features a 16-gauge flanged aluminum face and a choice of a textured black powder coat or brushed, black anodized finish. All stored media protrudes 3/8 in. to allow quick retrieval. Learn More...
- Only 2 left!
- 1 person rates: 9 out of 10
From Raxxess, a secure storage for otherwise loose equipment, tools, tapes, CDs, papers, and other personal items. Comes in an all steel construction with a flush mount latch and keyed lock. Perfect for any audio rack, in the studio, on the road, or at the installation.
Learn More...
