RCF M 18 Digital Mixer, 18-Channel
No longer available at zZounds
The RCF M 18 digital mixer is loaded with I/O and FX processing power. Launch the MixRemote app on your iOS or Android tablet to control your mix wirelessly!
Overview
The RCF M 18 wireless digital mixer represents a fully integrated solution for musicians. Maximum flexibility and comfort are granted by internal power supply, integrated Wi-Fi access point and antennas: the only items musicians need to carry are their instruments.
Line inputs have been developed with the same focus. The 10 TS jacks from 9 to 18 provide the line inputs of the M 18. Two of them, 9 and 10, are switchable to Hi-Z - High Impedance input (1M Ohm) - and allow direct connection of passive or low-level instruments directly, without the need for an adapter. This is the ideal solution for acoustic or electric or bass guitars with passive pickups.
The remote-controlled Mic Gain allows the user to control the Mic Preamps and Line input Gain even at high distance from the M 18 box. All the settings are stored in the snapshot memories and can be recalled according to the user's needs.
Six +22 dB balanced AUX Outputs are on hand to connect stage monitors or external effect processors, in case the M 18's internal processing is not sufficient for the user's needs. The +22 dB balanced MAIN MIX outputs are supported by a pair of male XLR.
MIDI IN and OUT ports are also present on the rear panel, allowing the connection of various types of MIDI controllers.
The footswitch port allows connection of a single or double stage footswitch to recall effects' presets or to mute effects' returns, as well as providing several other control functions.
A USB type-A port allows connection of USB devices, such as pen drives or hard disks, to create a complete stereo system for playback and audio recording: this supports all the most common audio file formats, both high-quality and compressed. The intuitive graphics of MixRemote App helps the user to manage song playlists also with the AUTO play function.
- 8 high-performance discrete Mic Preamp inputs
- 10 line input including 2 HiZ switchable input
- 1 stereo Main Out
- 6 balanced Aux output
- 1 stereo Headphones Out
- 1 dual footswitch connector
- MIDI IN and OUT Ports
- Selection of three type of PEQ , Gate, Compressor on every input channel
- Standard PEQ on every Aux Out
- Three internal FX: Reverb, Delay, Modulation
- Up to 16 insertable Plug-ins selected between plenty of option
- Valve warmer, Xciter, Maximizer and Stereo Graphic EQ on Main Mix read less
M 18 Inputs & Outputs
The six XLR and two Combo connectors that are present on the M 18's rear panel provide 8 mic preamp inputs, which are designed to lay the foundations for a transparent, warm and dynamic sound.Line inputs have been developed with the same focus. The 10 TS jacks from 9 to 18 provide the line inputs of the M 18. Two of them, 9 and 10, are switchable to Hi-Z - High Impedance input (1M Ohm) - and allow direct connection of passive or low-level instruments directly, without the need for an adapter. This is the ideal solution for acoustic or electric or bass guitars with passive pickups.
The remote-controlled Mic Gain allows the user to control the Mic Preamps and Line input Gain even at high distance from the M 18 box. All the settings are stored in the snapshot memories and can be recalled according to the user's needs.
Six +22 dB balanced AUX Outputs are on hand to connect stage monitors or external effect processors, in case the M 18's internal processing is not sufficient for the user's needs. The +22 dB balanced MAIN MIX outputs are supported by a pair of male XLR.
M 18 Ancillary Connections
A headphones stereo output completes the M 18's audio input and output suite. Using the… read more Personal Mix function on the PHONES menu of MixRemote App it is possible to create a fully personalized stereo monitoring. The headphones' output also offers MAIN MIX and, alternatively, PFL listening.MIDI IN and OUT ports are also present on the rear panel, allowing the connection of various types of MIDI controllers.
The footswitch port allows connection of a single or double stage footswitch to recall effects' presets or to mute effects' returns, as well as providing several other control functions.
A USB type-A port allows connection of USB devices, such as pen drives or hard disks, to create a complete stereo system for playback and audio recording: this supports all the most common audio file formats, both high-quality and compressed. The intuitive graphics of MixRemote App helps the user to manage song playlists also with the AUTO play function.
MixRemote App for iOS and Android
The MixRemote App enables complete and versatile control of the RCF M 18 Digital Mixer. Developed for iOS and Android, the MixRemote App has been designed with musicians in mind and is very simple to use, thanks to its intuitive Graphic User Interface. Each page or channel functions can be reached with a couple of touches of a single hand -- an essential convenience while playing.Features:
- Digital mixer, wirelessly controllable from your iOS or Android tablet via the RCF MixRemote app- 8 high-performance discrete Mic Preamp inputs
- 10 line input including 2 HiZ switchable input
- 1 stereo Main Out
- 6 balanced Aux output
- 1 stereo Headphones Out
- 1 dual footswitch connector
- MIDI IN and OUT Ports
- Selection of three type of PEQ , Gate, Compressor on every input channel
- Standard PEQ on every Aux Out
- Three internal FX: Reverb, Delay, Modulation
- Up to 16 insertable Plug-ins selected between plenty of option
- Valve warmer, Xciter, Maximizer and Stereo Graphic EQ on Main Mix read less
Specs
- Frequency Response: 20Hz - 20 kHz
- Processing Channels: 20
- Signal Processing: 32 Bit Floating Point
- A/D-D/A conversion: 24 Bits @ 48 kHz
- Dynamic Range: 114dB
- IEEE802.11 b/g standard: 2.4 / 5.0 GHz
- Antennas: 2 int. + 1 ext.
- Mic Inputs: 8
- Mic Gain range: 0 to 60dB
- Mic Input Noise Level: -128 dBu A-Weighted
- Mic Inputs Impedance: 1k ohms
- Mic Low Cut: adjustable 10 to 500Hz
- Line Inputs: 10
- Line Gain Selection: -10 dB / +4 dB
- Line Input Impedance: 10k ohms
- HI-Z Line Inputs: 2
- HI-Z Line Inputs Impedance: 1M ohm
- A/D Dynamic range: 114 dB
- Main MIX Outputs: 2 (L/R)
- AUX Send Outputs: 6
- FX Send Outputs: 3
- Phones Outputs: 1 Stereo
- Main Out Impedance: 50 ohms
- Main Out Level: 21 dBu
- Aux Out Impedance: 50 ohm
- Aux Out Level: 21 dBu
- Phones Out impedance: 40 ohm
- Phones Out Level: 35 dBm
- D/A Dynamic Range: 114 db
- GATES: Gates present on all input channels
- COMPRESSORS: Compressors present on all input channels
- EQ BANDS: 2 Parametric / 2 Shelving (Standard, Vintage, Smooth EQs on all input channels. Standard EQ on AUX Out.)
- Send Effects: 3
- MultiFX insert effects: 16
- MASTERING PROCESSORS: Valve Warmer, Xciter, Maximizer, 31 band Graphic EQ present on MAIN MIX
- USB AUDIO: Type A
- Supported Sample Rate: 48kHz
- Supported Play Formats: MP3, WAV, AIFF
- Compressed File format play: up to 320Kbps
- Supported Rec Format: WAV
- Footswitch: Dual
- Power supply: Internal
- Voltage requirements: from 100V to 240 V
- Power consumption: 40 W max
- Cabinet Material: ABS
- Color: black
- Dimensions: (H x W x D) 3.465 x 13.386 x 7.087" (88 x 340 x 180mm)
- Weight: 5.511 lbs (2.5kg)
- Processing Channels: 20
- Signal Processing: 32 Bit Floating Point
- A/D-D/A conversion: 24 Bits @ 48 kHz
- Dynamic Range: 114dB
- IEEE802.11 b/g standard: 2.4 / 5.0 GHz
- Antennas: 2 int. + 1 ext.
- Mic Inputs: 8
- Mic Gain range: 0 to 60dB
- Mic Input Noise Level: -128 dBu A-Weighted
- Mic Inputs Impedance: 1k ohms
- Mic Low Cut: adjustable 10 to 500Hz
- Line Inputs: 10
- Line Gain Selection: -10 dB / +4 dB
- Line Input Impedance: 10k ohms
- HI-Z Line Inputs: 2
- HI-Z Line Inputs Impedance: 1M ohm
- A/D Dynamic range: 114 dB
- Main MIX Outputs: 2 (L/R)
- AUX Send Outputs: 6
- FX Send Outputs: 3
- Phones Outputs: 1 Stereo
- Main Out Impedance: 50 ohms
- Main Out Level: 21 dBu
- Aux Out Impedance: 50 ohm
- Aux Out Level: 21 dBu
- Phones Out impedance: 40 ohm
- Phones Out Level: 35 dBm
- D/A Dynamic Range: 114 db
- GATES: Gates present on all input channels
- COMPRESSORS: Compressors present on all input channels
- EQ BANDS: 2 Parametric / 2 Shelving (Standard, Vintage, Smooth EQs on all input channels. Standard EQ on AUX Out.)
- Send Effects: 3
- MultiFX insert effects: 16
- MASTERING PROCESSORS: Valve Warmer, Xciter, Maximizer, 31 band Graphic EQ present on MAIN MIX
- USB AUDIO: Type A
- Supported Sample Rate: 48kHz
- Supported Play Formats: MP3, WAV, AIFF
- Compressed File format play: up to 320Kbps
- Supported Rec Format: WAV
- Footswitch: Dual
- Power supply: Internal
- Voltage requirements: from 100V to 240 V
- Power consumption: 40 W max
- Cabinet Material: ABS
- Color: black
- Dimensions: (H x W x D) 3.465 x 13.386 x 7.087" (88 x 340 x 180mm)
- Weight: 5.511 lbs (2.5kg)
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 732-902-6100
Email: service@rcf.it or TechSupport@rcf.it
Phone: 732-902-6100
Email: service@rcf.it or TechSupport@rcf.it
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
QSC K12.2 Powered Loudspeaker (2000 Watts, 1x12")
$899.99
- 12 x$75.00
- 8 x$112.50
- No Credit Check6 x$150.00
- No Credit Check4 x$225.00
Shure BLX288/PG58 Dual-Channel Handheld Wireless PG58 Microphone System
$549.00
- 8 x$68.63
- No Credit Check6 x$91.50
- No Credit Check4 x$137.25
Allen and Heath AH-CQ18T-CASE Padded Carry Case
$129.99
- No Credit Check6 x$21.66
- No Credit Check4 x$32.50
Electro-Voice ZLX-12P-G2 Powered Loudspeaker (1x12")
$549.00
- 8 x$68.63
- No Credit Check6 x$91.50
- No Credit Check4 x$137.25
