ONLY 3 LEFT

Audio-Technica AT2041 Studio Microphone Package

Start recording with this cost-effective mic pack from Audio-Technica. You get an AT2020 large-diaphragm condenser, plus an AT2021 small-diaphragm condenser.

Audio Technica AT4040SP Studio Pack

No longer available at zZounds
zZounds Gear Experts Say...
Includes Audio Technica AT4040 and AT4041 microphones.

The AT4040SP Studio Pack offers two of Audio-Technica's renowned 40 Series studio condenser microphones: the AT4040 large-diaphragm side-address condenser and the AT4041 cardioid condenser. Each microphone is transformerless, resulting in exceptional transient response and extremely clean output signals; each is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. A shock mount, stand clamp and windscreen are included, along with a protective wooden carrying case.

AT4040SP Studio Pack includes:
AT4040 side-address cardioid condenser microphone

AT4041 cardioid condenser microphone

AT8449 shock mount

AT8405a stand clamp

AT8159 windscreen

AT4040 Side-address cardioid condenser microphone
Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics

Externally polarized (DC bias) true condenser design

Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility

Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients

Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity

Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections

State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards read more

Switchable 80 Hz hi-pass filter and 10 dB pad

AT4041 Cardioid condenser microphone
Smooth, extended frequency response with a slight rise occurring in the high-frequency region

Ideal for drum overheads, acoustic guitar, piano, horns and under snare

Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer

Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients

State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards

Switchable hi-pass filter and rugged turned-brass microphone housing

Protective wooden storage case
read less

AT4040 Specs
Element: Condenser

Dynamic Range (Typical): 133 dB, 1 kHz at Max. SPL

Polar Pattern: Cardioid

Phantom Power Requirements: 48V

Frequency Response: 20 - 20,000 Hz

Switches: 10 dB pad; roll-off

Open Circuit Sensitivity: -32 dB (25.1 mV), 2 dB re 1V at 1 Pa

Low Frequency Roll-off: 80 Hz, 12 dB per octave

Impedance: 100 ohms

Weight: 12.7 oz (360 g)

Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.

Output Connector: XLRM-type

Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa

AT4041 Specs
Element: Capacitor

Dynamic Range (Typical): 121 dB, 1 kHz at Max. SPL

Polar Pattern: Cardioid

Phantom Power Requirements: 48V (+/- 4V)

Frequency Response: 20 - 20,000 Hz

Switch: Flat/roll-off

Open Circuit Sensitivity: -36 dB (15.8 mV), +/-2 dB re 1V at 1 Pa

Low-frequency Roll-off: 80 Hz, 12 dB per octave

Impedance: 100 ohms

Weight: 4.2 oz. (120 g)

Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.

Output Connector: XLRM-type

Signal To Noise Ratio: 70 dB, 1 kHz at 1 Pa

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com