Marshall JCM2000 Guitar Amplifier Full Stack with TSL100 Head, 1960A and 1960B Cabinets

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
open zoom image for Marshall JCM2000 Guitar Amplifier Full Stack with TSL100 Head, 1960A and 1960B Cabinets, Main
Marshall JCM2000 Guitar Amplifier Full Stack with TSL100 Head, 1960A and 1960B Cabinets, Main
zZounds Gear Experts Say...
All-tube. Three channels. Two 4 x 12 cabinets.

The brand new JCM2000 Triple Super Lead [TSL] series takes the critically acclaimed circuitry of the JCM2000 Dual Super Lead [DSL] range and then goes one step further.

By giving you 3 independent channels and many innovative features, the all-valve TSL range puts an unheard of degree of control, flexibility and, most importantly, TONE at your finger tips. From crystal clean to the mightiest Marshall roar, the TSL does it all.

Features
All valve powered. [4x Svetlana EL34 power valves]

3 independent channels for Clean, Crunch, and Lead

Mid Boost Switch for tonal options on the Clean channel plus Tone Shift on the Crunch and Lead channels

Unique Marshall Deep Switch on the Clean and Crunch/Lead channels adds extra low end resonance when selected

Separate Reverb for Clean and Crunch/Lead channels

Virtual Power Reduction [VPR] gives the extra saturation of a lower powered valve amp being driven hard

Power Amp Mute switch for silent recording

Separate FX Loops with front panel Mix controls and level selection for the Clean and Crunch/Lead channels

D.I. XLR Output with acclaimed Marshall Speaker Emulation

5-way foot controller for switching channels, Reverb and FX Loop on/off

TSL100
Output: 100 watts

Channels: 3

Independent tone network (per channel): yes

Mid boost on clean channel: yes

Deep switch (clean & crunch/lead): yes

Tone shift (crunch/lead): yes

Virtual power reduction: yes

Output mute: yes

Reverb control (clean & crunch/lead): yes

Emulated line out: yes

FX mix control (clean & crunch/lead): yes

Foot-switchable on/off FX loops: yes

Preamp valves: 4 x ECC83

Power amp valves: 4 x EL34

Included 5-way LED footswitch: PEDL-10021

Dimensions (mm): 748 x 297 x 214

Weight (kg): 22.5

1960A and 1960B
Black grille cloth

White piping

Black elephant grain vinyl

Speaker: 4 x 12 in. G12T-75

Power: 300 watt

Impedance: 4 or 16 ohms mono/8 ohms stereo

Dimensions: 760 x 830 x 360mm

Weight: 36.4 kg

For support or warranty questions, please contact the manufacturer:
Web: https://www.marshall.com/us/en/support/amps

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer