The FBQ2496 is the fastest (>0.2 sec.) and the only 96kHz feedback suppressor on the market. Using an ultra-fast feedback detection algorithm, it automatically and 'intelligently' locates up to 20 feedback frequencies per channel and sets extremely narrow notch filters to 'destroy' them, leaving the remainder of the signal virtually untouched. Easy does it: with the 'Set-and-Forget' default setting plus the Panic button, your Feedback Destroyer can be up and running in no time! The auto mode continuously monitors the mix, resetting programmed filters automatically, while the manual mode allows individual setting of up to 40 fully parametric filters with frequency, bandwidth and gain adjustment. Open MIDI architecture means that future software updates and flexible communication with digital equipment are a no-brainer. With its various modes you can master just about any live sound situation or use it as a creative sound-shaping tool.
Features:
Automatically and 'intelligently' locates and destroys up to 20 frequencies per channel
Ultra-fast feedback detection (>0.2 sec) due to proprietary FFT signal analysis
Ultra-narrow notch-filters (up to 1/60th octave) for very effective feedback suppression, while keeping highest sonic quality
'Set-and-forget' default setting plus Panic button enable immediate and super-easy Feedback Destroyer performance
Auto mode continuously monitors the mix, resetting programmed filters automatically
Single-shot mode automatically detects and destroys feedback and locks the filter until you reset it manually
Manual mode allows individual setting of up to 40 fully parametric filters with frequency, bandwidth and gain adjustment
Ultra-high resolution 24-bit/96 kHz A/D and D/A converter powered by a 32-bit DSP for ultimate audio performance
Open MIDI architecture for future software updates and flexible communication with digital equipment
Balanced inputs and servo-balanced outputs with gold-plated XLR and 1/4' TRS connectors
Internal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus lowest possible power consumption for energy savings
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by Behringer Germany
Technical Info
Audio Inputs
Connections: XLR and 1/4 in. TRS stereo connector
Type: Electronically balanced input
Input impedance: approx. 20 kOhms balanced
Nominal Input Level: -10 dbV/ +4 dBu (adjustable)
Max. Input Signal Level: +20 dBu at +4 dBu nominal level, +6 dbV at -10 dBV nominal level, typically -40 dB
Audio Outputs
Connections: XLR and 1/4 in. TRS stereo connector
Type: Balanced
Output Impedance: approx. 200 Ohms balanced
Max. Output Level: +20 dBu at +4 dBu nominal level, +6 dBV at -10dBV nominal level
Bypass
Type: Relay, hard bypass in case of power outage
System information
Frequency Response: <10 Hz to 44 kHz
Dynamic Range: 107 dB
THD: 0.007 % typically at +4 dBu, 1 kHz, amplification 1
Crosstalk: <-100 dB @ 1 kHz
MIDI Interface
Type: 5-pole DIN connectors IN/OUT/THRU
Digital Processing
Converter: 24 Bit / 96 kHz
Sample Rate: 96 kHz
Parametric Equalizer (PEQ)
Type: Max. 20 independent, fully parametric filters per channel
Frequency Range: 20 Hz to 20 kHz
Bandwidth: 1/60th to 10 octaves
Possible Value Range: +15 to -36 dB
Feedback Destroyer (FBQ)
Type: Digital signal analysis for feedback recognition purposes
Filter: Max. 20 digital notch filters per channel
Frequency Range: 20 Hz to 20 kHz
Bandwidth: 1/60th octave
Possible Value Range: 0 to -36 dB
Display
Type: 3-digit numeric LED display
Power Supply
Mains Voltage: ~100 - 240 V, 50 - 60 Hz
Power Consumption: Approx. 10 W
Fuse: T 1 A H 250 V
Mains Connector: Standard receptacle
Dimensions/Weight
Dimensions (H x W x D): Approx. 1 3/4 in. x 19 in. x 7 1/2 in.
Weight: Approx. 4.2 lbs.
loading...
