Samson SWLSL3 UHF1 Lavalier Wirelss System with ATMT350 Lavalier Microphone
No longer available at zZounds
zZounds Gear Experts Say...
This affordable UHF system is the result of Samson's pursuit of high performance and value, delivering the latest in technology for musicians.
Overview
This affordable UHF system is the result of Samson's pursuit of high performance and value, delivering the latest in technology for musicians. For the first time, the improved performance of true diversity UHF wireless is available at a price that makes it a practical alternative for speakers, fitness instructors and weekend musicians. True diversity performance means that the receiver actually consists of two internal receivers. A sophisticated switching system monitors signal levels on each receiver and instantly, silently switches to the strongest signal. Features include balanced 1/4 inch and XLR outputs, a multi-segment level meter that shows the strength of the UHF signal being received, squelch control for increased noise elimination, and a selection of transmitter for every application.
Features
Advanced wireless circuitry for super-reliable RF reception.
Detachable 3-pin connector for lavalier and headset mics that locks into position to reduce cable connection problems.
Rugged, triple-strength cable strain relief on instrument beltpack transmitter.
Receiver features a front panel 5-Segment Audio Level Meter
Balanced XLR and unbalanced 1/4 inch outputs with Mic/Line switch.
Extended 18-hour transmitter battery life with 3-Segment LED Battery Life Meter
300 ft. minimum distance transmission range.
Wide selection of popular mic elements to choose from.
Samson noise reduction for whisper-quiet performance.
13 available channels.
3-year limited warranty.
Features
Advanced wireless circuitry for super-reliable RF reception.
Detachable 3-pin connector for lavalier and headset mics that locks into position to reduce cable connection problems.
Rugged, triple-strength cable strain relief on instrument beltpack transmitter.
Receiver features a front panel 5-Segment Audio Level Meter
Balanced XLR and unbalanced 1/4 inch outputs with Mic/Line switch.
Extended 18-hour transmitter battery life with 3-Segment LED Battery Life Meter
300 ft. minimum distance transmission range.
Wide selection of popular mic elements to choose from.
Samson noise reduction for whisper-quiet performance.
13 available channels.
3-year limited warranty.
Specs
System Specifications
Channels: 6
Frequency Type: F3
Modulation Type: FM
Noise Reduction Type: Compander/Expander
Distance: 300 feet
Transmitter (UH1, UT1L, UT1G)
Oscillation Type Direct PLL
Pre-emphasis 50 µsec
Antenna:
- UH1 Integral Antenna
- UT1L / UT1G 1/4 Wave Length Wire (Pig Tail)
Input (UT1L) TB3M Switchcraft Connector
Maximum Input Level 3 V p-p
Battery Duracell MN1604 9-volt alkaline
Operating Temperature -20° C / 55° C
Switches / Controls Power ON/OFF, Audio ON/OFF
- UH1 Mic Level Volume
- UT1L / UT1G Audio Level
Display (LED) Battery Low/Mid/High (corresponds to <5.3 V / 5.3 - 7 V / >7V)
Operating Voltage 9 Volts +20% / -40%
Current Consumption 47 mA
RF Power 10 mW
Frequency Stability ±20 kHz
Spurious Ratio 2.5 nW
Deviation 20 kHz (16.5 kHz - 23.5 kHz)
T.H.D. (Overall) 0.5% (3% max) (@AF 1 kHz, RF 46 dBu)
AF Frequency Response 50 Hz - 15 kHz (±3 dB overall)
Battery life 12 hours
Receiver (UR1):
Oscillation Type Crystal Controlled
De-emphasis 50 µsec
IF Frequency 10.7 MHz
Antenna 1/4 Wavelength Rod
In/Out DC Inlet, Balanced Output, Unbalanced Output
Display (LED) Receiver A/B (Green), Power On (Red), Peak (Yellow), RF Level (5 pc)
Level Control Audio Level Volume, Mute Level Control
Operating Temperature 0° C / 50° C
Operating Voltage 12 Volts ±10%
Current Consumption 170 mA (at all LED lights)
Receiving Frequency Range 801 - 805 MHz
Sensitivity: 18 dBu (@ THD 2%)
Squelch Sensitivity: 0 - 40 dBu (Adjustable)
Selectivity ±150 kHz (AF Out Ratio -60 dB)
T.H.D. (Overall) 1% Max (@AF 1 kHz, RF 46 dBu)
S/N Ratio (Overall) 90 dB (w/IHF-A Filter)
Residual Noise 90 dBv (w/IHF-A Filter)
Band Mute ±40 kHz / ±100 kHz (RF IN: 46 dBu EMF)
AF Frequency Response 50 Hz - 15 kHz (±3 dB overall)
Audio Output Level - Unbalanced 0 dBv
Audio Output Level - Balanced -20 dBm (Line), -40 dBm (Mic)
Audio Output Impedance - Unbalanced 5 k Ohms
Audio Output Impedance - Balanced 600 Ohms
Channels: 6
Frequency Type: F3
Modulation Type: FM
Noise Reduction Type: Compander/Expander
Distance: 300 feet
Transmitter (UH1, UT1L, UT1G)
Oscillation Type Direct PLL
Pre-emphasis 50 µsec
Antenna:
- UH1 Integral Antenna
- UT1L / UT1G 1/4 Wave Length Wire (Pig Tail)
Input (UT1L) TB3M Switchcraft Connector
Maximum Input Level 3 V p-p
Battery Duracell MN1604 9-volt alkaline
Operating Temperature -20° C / 55° C
Switches / Controls Power ON/OFF, Audio ON/OFF
- UH1 Mic Level Volume
- UT1L / UT1G Audio Level
Display (LED) Battery Low/Mid/High (corresponds to <5.3 V / 5.3 - 7 V / >7V)
Operating Voltage 9 Volts +20% / -40%
Current Consumption 47 mA
RF Power 10 mW
Frequency Stability ±20 kHz
Spurious Ratio 2.5 nW
Deviation 20 kHz (16.5 kHz - 23.5 kHz)
T.H.D. (Overall) 0.5% (3% max) (@AF 1 kHz, RF 46 dBu)
AF Frequency Response 50 Hz - 15 kHz (±3 dB overall)
Battery life 12 hours
Receiver (UR1):
Oscillation Type Crystal Controlled
De-emphasis 50 µsec
IF Frequency 10.7 MHz
Antenna 1/4 Wavelength Rod
In/Out DC Inlet, Balanced Output, Unbalanced Output
Display (LED) Receiver A/B (Green), Power On (Red), Peak (Yellow), RF Level (5 pc)
Level Control Audio Level Volume, Mute Level Control
Operating Temperature 0° C / 50° C
Operating Voltage 12 Volts ±10%
Current Consumption 170 mA (at all LED lights)
Receiving Frequency Range 801 - 805 MHz
Sensitivity: 18 dBu (@ THD 2%)
Squelch Sensitivity: 0 - 40 dBu (Adjustable)
Selectivity ±150 kHz (AF Out Ratio -60 dB)
T.H.D. (Overall) 1% Max (@AF 1 kHz, RF 46 dBu)
S/N Ratio (Overall) 90 dB (w/IHF-A Filter)
Residual Noise 90 dBv (w/IHF-A Filter)
Band Mute ±40 kHz / ±100 kHz (RF IN: 46 dBu EMF)
AF Frequency Response 50 Hz - 15 kHz (±3 dB overall)
Audio Output Level - Unbalanced 0 dBv
Audio Output Level - Balanced -20 dBm (Line), -40 dBm (Mic)
Audio Output Impedance - Unbalanced 5 k Ohms
Audio Output Impedance - Balanced 600 Ohms
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 516-870-7200
Web: http://www.samsontech.com/contact/
Phone: 516-870-7200
Web: http://www.samsontech.com/contact/
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.