Audio Technica PRO35xcW Cardioid Condenser (Microphone Only)
No longer available at zZounds
zZounds Gear Experts Say...
Microphone terminated for use with UniPak transmitter. Includes AT8418 clip-on instrument mount.
Overview
Features
Ideal for woodwinds, brass, strings, piano, snare, and toms
Handles high-intensity sound without distortion
Perfect for active stage performances
UniMount clip permits accurate positioning while protecting element
5.9 in. (1.8 m) cable permanently attached to mic, screw terminals at power module
No power module
55 in. (1.4 m) cable terminated with 4-pin HRS connector for A-T UniPak wireless systems
Ideal for woodwinds, brass, strings, piano, snare, and toms
Handles high-intensity sound without distortion
Perfect for active stage performances
UniMount clip permits accurate positioning while protecting element
5.9 in. (1.8 m) cable permanently attached to mic, screw terminals at power module
No power module
55 in. (1.4 m) cable terminated with 4-pin HRS connector for A-T UniPak wireless systems
Specs
Element: Condenser
Dynamic Range (Typical): 115 dB, 1 kHz at Max. SPL
Polar Pattern: Cardioid
Phantom Power Requirements: 9 - 52V, 2 mA typical
Frequency Response: 50 - 17,000 Hz
Switch: Flat/low-roll-off
Open Circuit Sensitivity: -54 dB (1.9 mV) re 1V at 1 Pa
Low Frequency Roll-off: 150 Hz, 6 dB per octave
Impedance: 200 ohms
Weight: 0.25 oz. (7 g)
Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.
Power Module: In-line
Signal to Noise Ratio: 60 dB, 1 kHz at 1 Pa
Output Connector: A-T UniPak 4-pin HRS connector for AT wireless systems
Accessories Furnished: AT8418 UniMount instrument mount
Dynamic Range (Typical): 115 dB, 1 kHz at Max. SPL
Polar Pattern: Cardioid
Phantom Power Requirements: 9 - 52V, 2 mA typical
Frequency Response: 50 - 17,000 Hz
Switch: Flat/low-roll-off
Open Circuit Sensitivity: -54 dB (1.9 mV) re 1V at 1 Pa
Low Frequency Roll-off: 150 Hz, 6 dB per octave
Impedance: 200 ohms
Weight: 0.25 oz. (7 g)
Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.
Power Module: In-line
Signal to Noise Ratio: 60 dB, 1 kHz at 1 Pa
Output Connector: A-T UniPak 4-pin HRS connector for AT wireless systems
Accessories Furnished: AT8418 UniMount instrument mount
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.