Audio-Technica AT3031 Cardioid Condenser Microphone
No longer available at zZounds
zZounds Gear Experts Say...
30-20,000 Hz. 10 dB pad; roll-off.
Overview
AudioTechnica's new 30 Series is a family of high-quality condenser mics, available at affordable prices. Designed with rugged construction and high performance specifications, the 30 Series includes 3 models. AudioTechnica's modern engineering of these mics ensures consistency, especially important when using them in pairs.
Features:
Outstanding performance and versatility
High max SPL and wide dynamic range
Low self-noise (16 dB SPL) - perfectly suited for today's most sophisticated digital recording equipment
Flat, extended frequency response
Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad
Features:
Outstanding performance and versatility
High max SPL and wide dynamic range
Low self-noise (16 dB SPL) - perfectly suited for today's most sophisticated digital recording equipment
Flat, extended frequency response
Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad
Specs
Element: Condenser
Dynamic Range (Typical): 132 dB, 1 kHz at Max. SPL
Polar Pattern: Cardioid
Phantom Power Requirements: 11 - 52V, 3 mA typical
Frequency Response: 30 - 20,000 Hz
Switches: 10 dB pad; roll-off
Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
Low Frequency Roll-off: 80 Hz, 12 dB per octave
Impedance: 250 ohms
Weight: 4.1 oz (116 g)
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.
Output Connector: Integral 3-pin XLRM-type
Signal to Noise Ratio: 78 dB, 1 kHz at 1 Pa
Accessories Furnished: AT8405 stand clamp; foam windscreen; protective pouch
Dynamic Range (Typical): 132 dB, 1 kHz at Max. SPL
Polar Pattern: Cardioid
Phantom Power Requirements: 11 - 52V, 3 mA typical
Frequency Response: 30 - 20,000 Hz
Switches: 10 dB pad; roll-off
Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
Low Frequency Roll-off: 80 Hz, 12 dB per octave
Impedance: 250 ohms
Weight: 4.1 oz (116 g)
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.
Output Connector: Integral 3-pin XLRM-type
Signal to Noise Ratio: 78 dB, 1 kHz at 1 Pa
Accessories Furnished: AT8405 stand clamp; foam windscreen; protective pouch
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.