Audio Technica PRO127G Guitar Wireless System with Cable and Case

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
open zoom image for Audio Technica PRO127G Guitar Wireless System with Cable and Case, main
open zoom image for Audio Technica PRO127G Guitar Wireless System with Cable and Case, main
Audio Technica PRO127G Guitar Wireless System with Cable and Case, main Audio Technica PRO127G Guitar Wireless System with Cable and Case, main
zZounds Gear Experts Say...
Delivers "wired" sound with the freedom of wireless.

This is a dedicated guitar wireless system that delivers "wired" sound with the freedom of wireless. Its advanced antenna system extends operating range, without the extra expense of diversity systems. Its smart design includes details like a dual-power switch that lets you save battery power when you don't need full signal strength. Other features include a detachable guitar cable for improved durability, adjustable squelch to help eliminate interference, and a rugged carrying case for protection.

Features
Professional systems deliver "wired" sound with the freedom of wireless

Easy to set-up and easy to use

Advanced antenna system extends operating range

Adjustable squelch control on receiver helps eliminate interference

Dual-power battery-save switches on transmitters

UniPak transmitter features detachable guitar cable with professional locking connector

Durable carrying case included with each system provides protection, convenience and portability

Overall System
Operating Frequency: VHF band, 169 MHz to 207 MHz

Frequency Stability: ±0.005%

Modulation Mode: FM

Maximum Deviation: ±15 kHz

Operating Range: 200' minimum

Operating Temperature Range: 40° F (4° C) to 110° F (43° C)

Frequency Response: 100 Hz to 15 kHz

PRO-R1 Receiver

Receiving System: Non-diversity single-channel dual antenna system

Image Rejection: 50 dB minimum

Signal-to-Noise Ratio: 87 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz

Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz)

Sensitivity: 10 µV for 60 dB S/N (IEC-weighted)

Audio Output: 350 mV (1 kHz modulation, 10 kHz deviation, 1M ohm load)

Output Connector: 1/4 in. phone jack

Power Supply: 12V DC, 300 mA, with provided AC adapter

Dimensions (W x H x D): 4.33 x 1.38 x 8.27 in. (110.0 x 35.1 x 210.1 mm)

Net Weight: 10.2 oz (289 grams)

Accessory Included: AD1203A AC adapter

ATW-T27 UniPak Transmitter

RF Power Output: 50 mW Max

Spurious Emissions: Under federal regulations

Dynamic Range: >=90 dB

Input Connections: High impedance, low impedance, bias

Battery (not included): 9V (NEDA type 1604) alkaline

Current Consumption: 30 mA typical

Battery Life: Approximately 15 hours in High position, approximately 20 hours in Low position

Dimensions (W x H x D): 2.56 x 4.33 x 1.00 in. (65.0 x 110.0 x 25.4 mm)

Net Weight (without battery): 2.8 oz (78 grams)

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer