The Trademark 120 is a handsome, touring-sized combo that incorporates our highly-acclaimed SansAmp technology. It delivers a truckload of the industry's most desirable tube amp sounds and provides sensitive controls with a unique responsiveness to create your own trademark sounds as well.
Each Channel Features:
Character section to select individual amplifier styles:
Calif = Mesa/Boogie
British = Marshall
Tweed = Fender
Drive control to adjust the overall amount of gain and overdrive
3-band, active tone controls boost or cut ±12dB
Level control
Other Features
3 independent Character switchable preamps
Stereo power amp
2 special design 12" speakers
Top-of-the-line, full-length Accutronics¬ 3-spring reverb
Boost function for solos increases the volume level up to 9dB - without altering your tone
SansAmp XLR Direct Out for stage and studio applications allows you to go direct to any mixing console
Effect Loop with mono out/stereo in
Stereo headphone output, can also be used as a 1/4 in. direct out
Speaker outputs
Pre-drilled socket holes to facilitate caster installation
Technical Info
The distinctive Trademark 120 is covered in black vinyl complemented by a custom wheat color grill and decorative white piping.
Input Impedance: 1MOhm
Nominal Input Level: -10dBm
Optimal Output Load: 2x 8 Ohms
Power Output: 2x 60W
Effect Loop Input Impedance: 1MOhm
Effect Loop Input Level: approximately -20dBm
Effect Loop Output Impedance: 1KOhm
Effect Loop Output Level: approximately -20dBm
XLR Output Level: approximately -20dBm
Maximum Power Consumption: 160W
AC Input Power: 100V, 117V, 220V, 230V, 240V
Cycles: 50/60 Hz
Note: AC power cannot be switched. See authorized dealer/distributor for voltage modification information.
Speakers (2): Model #2112-A. Tech 21 Special Design 12 in. 100 Watts - 8 Ohms
Dimensions: Height 19 in. x Width 11 in. x Depth 26 in.
Weight: 55 lbs.
